What is the volume of glycerol?

It should be pointed out that glycerol solutions can be measured and quantified with the MVS between approximately 0.4 – 49.9 µL in a standard 96-well plate or 0.1 to 9.9 µL in a standard 384-well plate.

How do you weigh glycerol?

Glycerol weighs 1.2613 gram per cubic centimeter or 1 261.3 kilogram per cubic meter, i.e. density of glycerol is equal to 1 261.3 kg/m³; at 20°C (68°F or 293.15K) at standard atmospheric pressure.

How do you make a 1 molar solution of glycerol?

If the glycerol is not pure, you need to divide the weight by the concentration in %. Ex glycerol at 50%, you need to weight 99,094/0,50= 198,18 g of glycerol (50%) to obtain 1 mole of glycerol.

What is the density of glycerol in g mL?

Glycerol is often used as a component in electrophoresis loading buffers because of its density (1.26g/ml).

How do you make 80 glycerol solution?

2. After you have bacterial growth, add 750 µL of the overnight culture to 250µL of 80% glycerol in a 2 mL screw top tube or cryovial and gently mix. Note: Make the 80% glycerol solution by diluting 100% glycerol in dH20 and sterilize by autoclaving.

How do you dilute glycerol?

Dilute pure glycerol in distilled water to create a 50% glycerol solution. Use a sterile pipette to measure out 10 mL of both liquids and combine them in a single flask. Stir or shake the flask thoroughly until the liquids are evenly mixed.

What is the density of glycerol?

1.26 g/cm³Glycerol / Density
Note that glycerol with 1.26g/cm3 is much denser than water and, therefore, a 50% (v/v) solution will be very different from a 50% (w/v) solution.

What is the molecular weight of glycerol?

92.09382 g/molGlycerol / Molar mass

How do you make 40 glycerol?

From glycerol solution: 1. Measure out 40ml of 100% glycerol solution into a 250ml bottle. When pipetting glycerol, use ethanolsterilised scissors to cut the end off of a pipette to make pipetting easier 2. Add 60ml ddH​2​ O to the bottle.

What is the viscosity of glycerol?

The measured viscosity at stable conditions was 11.00 mPa·s which corresponds to 73.3% of full-scale.

How do you make 70% glycerol?

Glycerol solutions (50% and 70%) Prepare 50% and 70% glycerol solutions by mixing the appropriate volumes of ultrapure glycerol with 1X PBS(P). Use pH paper to ensure a pH of ~7.4.

100 000 About Glycerol Glycerol weighs 1.2613 gram per cubic centimeter or 1 261.3 kilogram per cubic meter, i.e. it’s density is equal to 1 261.3 kg/m³. The density was measured at 20°C (68°F or 293.15K) at standard atmospheric pressure. Also known as: Glycerin; Glycerine. Molecular Formula: C3H8O3

What is the price of glycerol?

Glycerol from triglycerides is produced on a large scale, but the crude product is of variable quality, with a low selling price of as low as 2-5 U.S. cents per kilogram in 2011. It can be purified, but the process is expensive.

What is the E number for glycerol?

As a food additive, glycerol is labeled as E number E422. It is added to icing (frosting) to prevent it from setting too hard. As used in foods, glycerol is categorized by the U.S. Academy of Nutrition and Dietetics as a carbohydrate.

What is another name for glycerol?

For a song by the band Bush, see Glycerine (song). Glycerol (/ ˈɡlɪsərɒl /; also called glycerine in British English or glycerin in American English) is a simple polyol compound. It is a colorless, odorless, viscous liquid that is sweet-tasting and non-toxic. The glycerol backbone is found in those lipids known as glycerides.