What is AW 32 hydraulic oil used for?

Table of Contents

ISO 32, 46 and 68 grades are most commonly used for hydraulics with vane-, piston-, or gear-type pumps, especially where pressures exceed 1000 psi. They can also be used to lubricate lightly loaded reciprocating compressors.

What is the difference between ISO 32 and AW 32 hydraulic oil?

These oils perform at the same grade as their ISO counterparts. An AW 32 hydraulic oil is going to be at 32cSt at 40°C for instance. The difference here is that there are additives contained within the oil.

What is ISO AW 32 hydraulic oil?

AW 32 Hydraulic Oils contain a zinc anti-wear additive that is designed to protect hydraulic systems and equipment by reducing wear. The quality of the base oil controls corrosion, oxidation, and suppresses foam and aeration. AW 32 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 32.

What does Aw mean in AW32?

Quite simply, AW stands for”anti-wear” and the ISO classification for AW oils is —HM. ” These oils provide protection to hydraulic machinery to ensure that they work properly and last.

Is AW 32 the same as 10W?

SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100. As you can see, there is a bit of a difference between ISO 68 and SAE 30. The viscosity of the fluid largely determines the oil temperatures within which the hydraulic system can safely operate.

What is the difference between AW 32 and AW 46?

The main difference between AW32 and AW46 hydraulic fluid is the weight – AW32 is a 10-weight fluid, and AW46 is a 20-weight fluid. AW32 is a good all-season fluid best suited for use in cooler outside temperatures during the fall, winter, and early spring months.

Can you mix ISO and AW hydraulic oil?

“Is it all right to mix an R&O hydraulic oil with an AW hydraulic oil in a hydraulic application?” Mixing oils with different additive packages is never recommended. Doing so could compromise the additive performance of both constituents, cause corrosion of component surfaces and lead to increased mechanical wear.

Is hydraulic oil better 32 or 46?

46 is medium and No. 68 is thicker. Generally speaking, if the temperature is low in winter, use #32 & #46 hydraulic oil with a lower viscosity, and use #68 hydraulic oil with a higher viscosity in summer.

Is AW 32 synthetic?

AMSOIL Synthetic AW Series Anti-Wear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality synthetic oil technology.

Can you mix AW32 and AW46 hydraulic oil?

What weight is AW 32 hydraulic oil?

10 weight oil
AW32 is approximately a 10 weight oil with the additives ▪ AW46 is approximately a 15 weight oil with the additives ▪ AW68 is approximately a 20 weight oil with the additives AW –provides many of the advantages of premium hydraulic oil at a moderate price.

What is the difference between AW and ISO hydraulic fluid?

Looking at the above array of oils: R&O stands for rust and oxidation – mineral oils with improved anti-rust and anti-oxidation properties. The ISO classification for these oils is HL. AW stands for anti-wear – R&O oils with an anti-wear additive package.