What is a rear load dumpster?

Rear load containers are designed for use in cities, alleyways and other areas where space is tight. These rugged containers are manufactured using heavy gauge steel and solid steel trunnion bars to withstand years of heavy, dense loads.

What is the measurement of a 10 yard dumpster?

The approximate overall dimensions of a 10-yard dumpster are: 20 feet long by 8 feet wide by 3 feet high, and 2 feet high on the inside of the bin.

How do you measure a yard for a dumpster?

To calculate the capacity of a dumpster, multiply its interior dimensions in feet (length x width x height) together to get its volume in cubic feet. Then, divide that number by 27 to convert the measurement to cubic yards.

How much weight can you put in a 8 yard dumpster?

Weight Limit: Typically can store up to 1,600 pounds of material.

What is rear loading?

Rear loading is the method by which goods are loaded and unloaded on/from a transport vehicle. In contrast to a side loading method (goods are not loaded and unloaded from the side), goods are taking on/off only via the rear.

How tall is the average dumpster?

The commercial dumpster dimensions for this all-around dumpster is typically 6 feet wide, 5 feet long and top out at 6 feet tall, enough to accommodate up to 1400 pounds of trash.

How do you figure yardage?

Here’s how to do this:

  1. Convert the dimension in inches to yards (6 inches ÷ 36 inches = 0.167 yards)
  2. Convert the dimensions in feet to yards (12 feet ÷ 3 = 4 yards)
  3. Multiply the three dimensions together to find the number of cubic yards (0.167 x 4 x 4 = 2.67 cubic yards)

How much weight can you put in a 10 yard dumpster?

4,000-6,000 pounds
A 10 yard container typically holds 2-3 tons, or 4,000-6,000 pounds. But if you’re getting rid of materials like concrete or brick, you can rent a special heavy debris dumpster with a 10 ton weight limit.