What is a 20 amp GFCI breaker?

Table of Contents

The Square D by Schneider Electric Homeline 20 Amp 1-pole GFCI circuit breaker is designed for overload and short-circuit protection, combined with Class A ground fault protection. Designed exclusively for the residential market, Homeline products offer everything you need to distribute electricity throughout your home.

Should I use a 15 or 20 amp GFCI?

Kitchens and bathrooms should always have 20 amp gfci outlets. However, you must be using number 12 wire for 20 amp gfci or regular outlets If your wiring is number 14 guage then use a 15 amp. So, the wire size and breaker size together should be rated for 20 amps!

Can you put a 20 amp GFCI on a 15 amp breaker?

According to National Electrical Code, only a 15-amp or 20-amp electrical receptacle can be installed to a 20-amp circuit. A 15-amp receptacle may also be installed on a 15-amp circuit. However, a 20-amp GFCI outlet may not be installed to a 15-amp circuit.

What does a 20amp outlet look like?

A 20 amp receptacle will have one slot that looks like a sideways T. If it is a dedicated circuit it would be a single receptacle instead of a duplex. If you look at the breakers in your breaker panel and there is a “20” on the handle, it’s a 20 amp circuit.

What happens if you put a 15 amp GFCI outlet on a 20 amp circuit?

Having the GFCI marked 20 Amp is so the one model can be used for either type of circuit. If you have a 20 Amp Circuit then there is no problem with using 15 Amp receptacles on the same run. Having the receptacles is one thing.

What is the difference between a 15 amp GFCI and a 20 amp GFCI?

There are different pin configurations for 15a and 20a receptacles. A 20a receptacle has one slot that is turned sideways or T shaped to allow a 20amp plug to be used. A 15amp receptacle won’t overload the circuit. Only 15a devices will be allowed to be plugged in.

What happens if you use a 20 amp GFCI on a 15 amp circuit?

You can’t use 20A GFCI on a 15A circuit because a 20A GFCI will draw more power than the 15A circuit can handle. This will cause the breaker to trip. If the breaker malfunctions, you could start a fire, especially if you are using that 20A GFCI to operate a 20A appliance.

What happens if you put a 20 amp GFCI outlet on a 15 amp circuit?

First off, connecting a 20 Amp load to a 15 Amp circuit will overload the circuit but shouldn’t cause a fire because the 15 Amp breaker will trip. A 20 amp GFCI doesn’t pose any threat just by being there.