How much horsepower does a BTR Stage 3 cam add?
The BTR Stage 3 N/A Camshaft (LS1/LS2/LS6) is the go to for people desiring an aggresive idle matched with a powerband that will stretch into the 450+ whp range around 6000 RPM when paired with quality supporting modifications….More videos on YouTube.
|Cam Bolt Style||THREE BOLT|
Can I install a BTR Stage 3 cam on a stock converter?
Btr 3 will be fine on the stock convertor as long as you have a competent tuner.
What size is a Stage 3 cam?
PCM of NC Stage 3 Truck Cam (4.8L, 5.3L, 6.0L, 6.2L)
How much horsepower does a Stage 3 cam make?
Summit 8710 Stage Three Cam: 549 HP and 492 LB-FT.
How is Cam overlap calculated?
There are a couple different ways to calculate the overlap of the cam. 1) The easiest way is to add the intake opening times to the exhaust closing time. Seat to seat times (advertised duration) must be used. . 050″ durations or timings will not give the correct overlap.
How much horsepower does a stage 4 cam add?
Equipped with the Summit Stage-4 cam, the peak power output jumped to 568 hp, but peak torque dropped slightly to 510 lb-ft. If you look at the curves, the wilder cam offered more power above 5,500 rpm, but it lost out to the milder Comp cam below that point.
How do you read cam specs?
Reading a Cam Card: Lobe Separation Angle (LSA) This figure is derived by adding the intake center line plus the exhaust center line and dividing by two. In this case: 108 + 116 = 224 degrees / 2 = 112 degrees.
Does camming a car make it faster?
Does Camming A Truck Make It Faster? In most cases, yes, but it depends on the model of the truck and which custom cam you use. With that said, aftermarket cams are designed for high-end performance, so you can typically expect to experience faster speeds after camming a truck.
What are the specs of the BTR Stage 3 N/a camshaft?
BTR CAMSHAFT – LS1/LS2 – N/A STAGE 3 – 33144133R0 Specs: 231/244.630″/.615″ 112.5+2.5 The BTR Stage 3 N/A Camshaft (LS1/LS2/LS6) is the go to for people desiring an aggresive idle matched with a powerband that will stretch into the 450+ whp range around 6000 RPM when paired with quality supporting modifications.
Why choose an LS3 camshaft from BTR?
LOBES DESIGNED IN HOUSE BY BTR! The LS3 camshaft lineup was born from an assortment of custom grinds, dyno testing, daily driving, and real world experience. This camshaft will not require any flycutting of pistons with OEM LS3 combustion chamber size.
What are the specs of an LS3 camshaft?
If your application has an automatic transmission, you will need an aftermarket torque converter. Specs: 229/243.9 .630″/.615″ 113+4 LOBES DESIGNED IN HOUSE BY BTR! The LS3 camshaft lineup was born from an assortment of custom grinds, dyno testing, daily driving, and real world experience.
What is a stage 3 grind camshaft?
The end result is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment for reliability. The Stage 3 grind is a popular choice for those looking to delete DOD/AFM, or just add some pep to your trucks step.