How do you reset a transfer belt counter?

Reset the Transfer Belt Life / Counter

  1. Login as the Administrator at the Control Panel. See the Related Content for Additional Information.
  2. Select the Machine Status button.
  3. Select the Tools tab.
  4. Select Troubleshooting.
  5. Select Resets.
  6. Select Supply Counter Reset.
  7. Select Transfer Belt.
  8. Select Reset Counter.

How do I reset my Konica Minolta trouble code?

How to: Resetting Konica Minolta errors

  1. Step 1: Turn OFF the Main Power Switch.
  2. Step 2: Turn Main Power Switch ON while pressing the Utility/Counter key.
  3. Step 3: Touch [Trouble Reset].
  4. Step 4: Check to make sure that [OK] is displayed and the it has been reset.

How do I reset my bizhub c258?

>Turn Power Off inside front door Press and Hold Yellow Reset Button & Keep Held Down while turning power back on until a black dot appears in the top right of the control panel display then release. > Switch off and on again and error should clear.

What is a transfer roller unit?

A printer transfer roll is a component in your office’s laser printers that transfers images onto paper. The component also collects any excess toner and routes it to a waste reservoir so the ink doesn’t collect inside of your printer.

What is a transfer belt error on a Samsung printer?

Upon installation of a new transfer belt an error message asking you to “Replace Transfer Belt” still shows. This error is caused by a counter inside your printer not being correctly reset when the new belt is installed.

How do I clear the memory on my Konica Minolta?

Press [System Setting] on the [Administrator Setting Menu] screen, and then press [Restrict User Access], [Lock/Delete Mode Memory], and [Scan Mode Memory] in sequence.

Where is the sub power switch on Konica Minolta?

Turn on the Sub power switch on the right side of the machine. The Power LED on the Control panel lights up blue. The wake-up and warm-up screens is displayed.

How do I know if my transfer rollers are bad?

A laser printer uses rollers to transfer text from the printer mechanism to the paper. When it isn’t working properly, the quality of your prints can suffer. Signs of a bad transfer roller include streaking, squealing, jamming and odors emanating from the printer.