How do you open a Gerber drain?

Grab the small extension nub at the top of the lift and turn stopper. Rotate this counterclockwise to remove. Pull the stopper off the center support. If you have trouble removing the nub, use two pairs of pliers, one to hold the stopper steady, the other to turn the nub.

How do you unscrew a drain stopper?

Push and Pull

  1. With the stopper in the open position, unscrew the knob from the stopper base.
  2. Push the stopper closed to reveal the center post.
  3. Use pliers or a flat-head screwdriver in the center to loosen the slotted screw inside the center post in a counterclockwise direction.
  4. Lift the stopper from the drain.

How do you remove a push and pull drain stopper?

How to Remove a Push-Pull Drain Stopper:

  1. Set the drain to its open position.
  2. Lift up on the drain stopper’s knob and turn it counterclockwise.
  3. After enough turns, the drain stopper should be unscrewed and come free from the drain opening.

How do you remove a lift and turn drain stopper?

For lift and turns with a twist style base: Use a wrench to rotate the base counterclockwise until the stopper loosens from the drain strainer. Then, detach the stopper from the drain. Although similar to the lift and turn, the push and pull drain stopper contains a less complicated removal method.

How do you use a push-and-pull drain stopper?

Just push the plug down to close the drain and pull the knob up to open the drain. The knob on a push-and-pull drain stopper is usually attached to the stopper lid, but in some cases, the knob is a separate piece. If your drain stopper knob is a separate piece, then it should be removed from the stopper in order to access the fastening bolt.

How do you fix a clogged drain stopper?

If the stopper is in good condition, then clean the drain and stopper with a bathroom cleaning solution to remove hair, soap scum, dirt, grime, and other debris. Start the reinstallation process by inserting the rocker arm into the drain.

How do you remove the stopper on a Kohler sink?

To remove the stopper, you’ll need to go under the sink and unscrew the pivot rod arm connected to the sink drain pipe. You may need pliers or a wrench to help twist the arm off. Pull out the arm, including the round plug attached to it. Then, return to the sink and pull the stopper out.