What is AW 6082 T6?
Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining.
What is the difference between 6061 and 6082?
6061 and 6082 aluminum alloy are the alloy in the aluminum-magnesium-silicon family (6xxx series). The main difference is that the composition ratios of silicon and magnesium in 6082 and 6061 are different.
What does temper T6 mean?
Here, the T6 temper means that the alloy is solution treated at high temperatures and then artificially aged at a certain temperature (for example, 420–480K) to yield the precipitation hardening of alloys.
What does T6 stand for in aluminum?
The T6 temper designation means that the aluminum alloy has been given a solution heat treatment followed by quenching, cooling, and aging. Artificially aging allows the material to achieve the desired precipitation hardening.
Can you bend 6082 aluminium?
6082 is often used for architectural applications. This grade is highly corrosion resistant and has good formability. Greater formability for bending aluminium tubing can be achieved through an annealing process where aluminium can be brought to a zero temper. The bending takes place between three points.
Can you weld 6082 aluminium?
Can you weld it? Yes, you can! 6082 displays excellent weldability as long as you bear in mind it loses strength at the welding zone. You should use alloy 4043 wire to weld the material to itself and alloy 5356 wire if you want to weld 6082 to 7005.
Is 6082 a structural alloy?
Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082. The extruded surface finish is not as smooth as other similar strength alloys in the 6000 series.
What is 6082-T6 extrusions?
6082 – T6 Extrusions. Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Alloy 6082 is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining. As a relatively new alloy, the higher strength of 6082 has seen it replace
What is the equivalent of 6082 in the T6 T651 temper?
In the T6 and T651 temper, alloy 6082 machines well and produces tight coils of swarf when chip breakers are used. Aluminium alloy 6082 also corresponds to the following standard designations and specifications but may not be a direct equivalent: DIN 3.2315
What is the difference between 6082 and 6061 aluminum?
Aluminium 6082 is the strongest of 6082 vs 6061 Tensile 6082 aluminum is a new alloy with similar composition to 6061 aluminum, but the tensile strength is about higher than 6061. At the same time, because of the lower copper content, it has better corrosion resistance, but It loss any extrusion properties and anodizing