What is an escutcheon plate used for?

An escutcheon is a type of plumbing supply typically made of metal that hides the unsightly hole in the wall that pipes usually come through. People can also refer to them as flanges or cover plates.

Are escutcheons necessary?

The escutcheon is necessary to cover the gap between the sprinkler head and the ceiling tile or drywall. They provide a finished aesthetic look but are key to the sprinkler head activating properly.

Do I need an escutcheon plate?

Yes, an escutcheon plate is required by plumbing codes: “Collars or escutcheon plates shall be provided to cover the openings around pipes penetrating walls, floors, or ceilings in finished areas that are exposed to view.” An escutcheon plate is the disc around a plumbing pipe or a fixture handle at the wall that seals …

Should I caulk around escutcheon?

Apply Caulk It is important to cover the whole seam because water can leak through even the smallest gap. Shower and tub trim parts you should caulk include: Tub spout. Faucet handle escutcheons.

Is escutcheon required?

Escutcheons are the circular plates which go around the base of a fire sprinkler head. Yes, they are absolutely required by NFPA codes.

What size escutcheon plate do I need?

If you have a 1” pipe, then you need a 1” escutcheon. Unfortunately, different materials of pipe may have the same internal dimensions, but will have varying thicknesses. Therefore, a 1” copper pipe may need a different size escutcheon than a 1” galvanized steel pipe.

How do escutcheons work?

The practical purpose of an escutcheon is to protect a lock cylinder from being drilled out and to protect the area from damage caused by the key when it misses the keyhole. Some come with a rotating cover to prevent prying eyes and also to prevent insects and dust from coming inside.

What is an escutcheon cap?

An escutcheon (pronounced ‘ess-kutch-on’) is the (typically) metal bit that hides the ugly hole in the wall that the pipes come through. Some people call them flanges or cover plates.

How do you seal an escutcheon plate?

Most escutcheon plates are installed by applying caulk or sealant to the back of the plate and pressing it against the barrier.

How do you caulk around escutcheon?

Place the tube’s tip on the outer edge of the base of the escutcheon and squeeze the caulk trigger slowly. Push the tip around the edge to lay a smooth bead.