What is a FM-200 inspection?
Our FM-200 fire suppression system inspection and maintenance services include: Testing and cleaning all detectors. Verifying shutdown and evacuation circuits. Verifying cylinder pressures and weights. Checking for changes in hazard integrity.
What is FM-200 integrity test?
An Integrity test predicts how long fire suppressant agents take to descend to a given level in the room without having to release the agent itself. The Integrity test is carried out using: • Modular adjustable panels for the door frame which adjusts to fit a wide variety of door sizes.
Where is FM-200 used?
FM200 fire suppression systems are commonly used in: DATA Centres. Comms Rooms. Telecommunication facilities.
Is FM-200 safe for human?
FM-200 is a clean, colorless, and environmentally friendly fire suppressant that is electronically non-conductive and safe for humans. The fire suppression system extinguishes flames primarily through heat absorption and is safe for use in occupied areas.
How does FM-200 system work?
FM-200™ suppresses fire by disrupting the fire triangle. The fire triangle is made up of heat, oxygen, and a fuel source, and by removing one of these elements, the fire is extinguished. FM-200™ removes the heat or free radicals, which interferes with the fire triangle’s chemical reaction to extinguish the fire.
How do you test a fire suppression system?
Locate the inspector’s test valve and slowly open so that the valve is in line with the pipe. Allow the water to flow for about 60 seconds or until the alarm sounds. If connected to central station, call to confirm the signal was received. Slowly close the inspector’s test valve.
What is puff test for clean agent system?
The puff test is conducted with the caps on the discharge nozzles, and uses air or nitrogen to enter the system. Once the air or nitrogen is introduced into the system and the caps on the discharge nozzles pop off, it is believed that the system is reasonably unobstructed.
What is a clean agent room?
The clean agent systems are three dimensional as well. Most systems can reach extinguishing concentration levels in just 10 seconds or less. Clean agents are designed to suppress the fire while it’s still in its incipient stage, meaning it will suppress the fire before it grows and enters into the heat/flame stage.
Is FM200 safe for human?
What is deluge system?
A deluge fire protection system has unpressurized dry piping and open sprinkler heads. The system is directly connected to a water supply and when the system is activated, a deluge valve will release the water to all the open sprinkler heads. The valve is opened when activated by a heat or smoke detection system.