What does the F code mean on a Whirlpool washer?
An F error code usually means the washer will not work at all, and the control board will need to be replaced.
How do you fix a code F on a Whirlpool washer?
Quick Steps to Reset the Whirlpool Cabrio Error Code F If there isn’t a control board failure, the machine will self-assess and reset while unplugged. Next, plug in the washer and hold the START and PAUSE buttons at the same time for 1 minute. This simple exercise should clear the error code.
What does F mean on a washer?
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly.
What does F code stand for?
In ICD-10, the diagnostic codes that start with the letter “F”, cover the category of “Mental, Behavioral and Neurodevelopmental disorders”.
How do I fix the f5 on my Whirlpool washer?
Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
What does F mean on a Maytag washer?
Maytag F/02 – Drain Cycle Too Long The manufacturer has assigned this error or fault code to indicate that the washing machine drain cycle is taking too long. After 8 minutes of drain time the error code is displayed. Press PAUSE/CANCEL twice to clear the display.
What does f1 mean on a Whirlpool Duet washer?
The F01 error on this model washer means the relay for the drain pump motor on the main control board (CCU) has failed to activate or a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU occurred.
Why is my Whirlpool washer flashing F5?
Possible Solutions The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area.
Why does my washer keep saying F5?
Possible Solutions The F5 E2 alert indicates the washer can’t engage the lid lock because there may be an obstruction in the lid lock area. Please check the lid lock area and remove any objects in that area. Also verify there are no clothing items in the way.