How much does it cost to extend golf clubs?

Lengthen Shaft ($5.99 Steel or $6.99 Graphite per club*): Most irons, putters, and woods can have length added to the existing shaft. *Save grip Fee may apply.

Can you get extensions on golf clubs?

Use these steel shaft butt extensions to extend shafts and increase the length of clubs. The extensions are double length. When cut in two, each section has an end tapered to fit inside the shaft being extended.

How much does it cost to re epoxy a golf club?

Re-epoxy clubhead — $10.00. Install Wood Shaft: Bore thru — $35.00 / Standard — $30.00. Install Iron Shaft: Bore-thru — $18.00 / Standard — $15.00.

How much does it cost to get golf clubs Reshafted?

The average cost to reshaft your golf clubs is $24 per club plus the cost of the shaft and grip. A new iron shaft and grip can range between $10 and $95 while a new driver shaft and grip can range between $18 and $440. The majority of the cost comes down to what type of shaft you want and what grips you like.

Can you get irons lengthened?

Most players consider using longer shafts in their clubs at some time or another, believing that longer shafts equal more distance, although that isn’t necessarily true. There are two ways to lengthen your shafts. You may add extenders to your existing shafts or you may replace your existing shafts with longer ones.

Should I add length to my irons?

Sometimes a golfer’s height and arm length will negate each other and a standard length is the best option. As length is increased, so is the weight. Increasing the length also changes shaft flex. For every 1″ added, the shaft becomes one flex softer; likewise, a shorter shaft plays stiffer.

What if my golf clubs are too short?

What Happens When Golf Clubs Are Too Short? For most golfers, having clubs that are too short will be better than if they’re too long, but can still result in inconsistent shots. Clubs that are too short will make you stand bent over, which can cause back pain. You’ll also have the tendency to push the ball a lot.

Can you use JB Weld on golf clubs?

JB Kwik Weld has a 2451 psi which is just about perfect strength for a golf epoxy and heat tolerance of 230 degrees. The best part is it has a 6 minute working time, 1 hour harden time, and 6 hour cure time. I’m sure I’m not the first person who didn’t have 24 hours for the epoxy to cure and won’t be the last.

Can I use Gorilla epoxy for golf clubs?

Can you use Gorilla Glue on golf clubs? Probably not a good idea to use Gorilla glue, as the force and torque pressure put on a golf shaft would likely would be too much and result in the glue failing, and the club head flying off the the golf shaft.

Is it worth Reshafting my irons?

Reshafting is just one way to keep your clubs performing at a high level. You can also benefit from regripping your clubs. Replacing worn-out golf grips can help make your clubs feel new again. Adding the right shaft to your favorite clubs can get you back on the course and working toward a new personal low round.

At what height should you get longer golf clubs?

Your Height If you are taller than about 6’0”, you will likely need clubs that are a bit longer than normal. The standard golf clubs that come from the manufacturer are typically built to help golfers who are around 5’7” to 6’0”. If you are 6’4”, you can almost guarantee that you will need longer golf clubs.