How does modular synthesis work?

Table of Contents

Simply put, a modular synthesizer is an electronic musical instrument that consists of a multitude of different components (modules) that are used and combined to create electronic sounds. The individual modules are connected via cables (patch cables), switches, sliders and patch panels.

What is modular synthesis good for?

Modular synths are ideal for those who want to exercise some more control over their creative process, giving you the opportunity to build an instrument that’s truly your own.

Is modular synth hard to learn?

Learning how to “patch” modular synths isn’t difficult – once you grasp how they work on the inside, and know what each module is doing to the signal flowing through it. Fortuantely, this knowledge can be learned in just a few hours, and will cost you less than most modules.

What is a modular in music production?

Modular music is music that originates from the combination and overlapping of different compositions one over the other. The compositions —also called modules— are written by one or many different composers in different moments.

How much is a modular synth?

The cost of a modular synth depends on which modules you use, their brand, their age, and their condition. However, modules can range in price from about $80 to hundreds of dollars or more.

What is CV modular synth?

CV/gate (an abbreviation of control voltage/gate) is an analog method of controlling synthesizers, drum machines, and similar equipment with external sequencers. The control voltage typically controls pitch and the gate signal controls note on-off.

When were modular synthesizer invented?

October 12, 1964
On October 12, 1964, Bob Moog unveiled the first modular voltage-controlled synthesizer, an instrument that forever changed the course of modern music.

What do you need for Eurorack?

In order to start a Eurorack system, you will need a case and a power supply for your modules. Cases are measured horizontally in HP, which stands for horizontal pitch, or hole point. The two most common widths are 84HP and 104HP.