## How do you convert drainage fixture units to GPM?

How to Convert DFU to GPM

1. Locate the Uniform Plumbing Code (UPC) for your state.
2. Locate the drainage fixture unit rating for your device or system in the UPC.
3. Divide the drainage fixture unit rating by 2 to get the gallons per minute of flow for your device or system.

How many gallons is a fixture unit?

A fixture unit is equal to 1 cubic foot (0.028 m3) of water drained in an 11⁄4 inches (32 mm) diameter pipe over one minute. One cubic foot of water is roughly 7.48 US gallons (28.3 l; 6.23 imp gal). A Fixture Unit is used in plumbing design for both water supply and waste water.

### Can you convert DFU to GPM?

1 DFU ≈ (approximately) 7.48 US GPM or ≈ 0.47 liters/second.

How are fixture units calculated?

A Fixture Unit is not a flow rate unit but a design factor based on the rate of discharge, time of operation and frequency of use of a fixture. A fixture unit is equal to one cubic foot of water drained in an 1 1/4 pipe over one minute (≈ 7.48 US gpm, ≈ 0.47 l/s).

#### How are drain fixture units calculated?

A fixture unit is equal to one cubic foot of water drained in an 1 1/4 pipe over one minute (≈ 7.48 US gpm, ≈ 0.47 l/s).

How many fixture units is 2 drain?

DIAMETER OF PIPE (inches) MAXIMUM NUMBER OF DRAINAGE FIXTURE UNITS (dfu)
Total for horizontal branch Total for stack greater than three branch intervals
11/2 3 8
2 6 24
21/2 12 42

## How many fixture units is a shower?

Including minimum fixture branch pipe sizes

Individual fixtures Minimum fixture outlet pipe size Number of units
Kitchen sink, domestic 1/2 inch 1.5
Laundry sink 1/2 inch 1.5
Lavatory (wash basin) 1/2 inch 1.0
Shower (per head) 1/2 inch 2.0

How do you calculate building GPM?

The NFA “quick-calculation” formula can be used as a tactical tool to provide a starting point for deciding the amount of water required at an incident scene….

1. 60 X 20 ÷ 3 X 1 (floor) = 400 gpm.
2. 60 X 20 ÷ 3 X 2 (floors) = 800 gpm if fully involved.
3. 60 X 20 ÷ 3 X 1 = 400 gpm.
4. 2 exposures: 400 gpm X (25% X 2) = 200 gpm.

### How are water fixtures calculated?

According to the plumbing code, the minimum number of plumbing fixtures required in a building depends greatly on the intended use….Getting Started

1. Office- 3,800 / 200 = 19.
2. Storage- 8,405 / 5,000 = 1.68.
3. Kitchen- 1,200 / 30 = 40.
4. Dining- 6,420 / 30 = 214.

How many fixture units are on a 2 drain?

#### How many fixture units can a 3 inch drain?

DIAMETER OF PIPE (inches) MAXIMUM NUMBER OF DRAINAGE FIXTURE UNITS (dfu)
11/2 3 4
2 6 10
21/2 12 20
3 20 48

How many fixture units is a shower drain?

Drain Fixture Unit (DFU) Table for Common Plumbing Fixtures 1
Plumbing Fixture Type Drain Fixture Unit Load Rating PRIVATE (DFU) Drain Fixture Unit Load Rating PUBLIC (DFU)
Mobile home main trap 12
Shower stall 2 2
Sink, bar 1 2 (?)

## How do you calculate waste fixture units to GPM?

Locate the Uniform Plumbing Code (UPC) for your state.

• Locate the drainage fixture unit rating for your device or system in the UPC.
• Divide the drainage fixture unit rating by 2 to get the gallons per minute of flow for your device or system.
• How do you convert BTU to GPM?

General Rules of Thumb

• Hydraulic Cooling For Injection Molding Press
• BTU/hr = Motor Horsepower x 1,500
• Hydraulic Cooling For Stamping Press
• BTU/hr = Motor Horsepower x 1,200
• Grinder Cooling
• BTU/hr = Motor Horsepower x 2,400
• Air Compressor Cooling with After Cooler
• BTU/hr = Compressor Horsepower x 3,000
• ### How to convert DFU to GPM?

“Our calculations are based on 257 Drainage Fixture Units (DFU) for the entire building. This includes the sanitary and grease waste streams combined (but not the food pantry/dental clinic building). Per the IPC, 2 DFU’s is equal to 1 GPM continuous to semi-continuous flow. Therefore, approximately 128.5 gpm waste flow from building.”

How many CFS are in a GPM?

Through partnership and collaborative efforts, the DRC has restored up to 208 cfs (equivalent to 93,357 gallons per minute) of flow in the following focus reaches: Deschutes River, Whychus Creek