How do I read my Whirlpool dishwasher code?
You need to count the number of times the clean light flashes to find out the error code on your Whirlpool dishwasher. As an example: If the clean light flashes 5 times followed by 2 flashes (5-2) then this error is showing the function code = “Door issue” and the problem code is “The door switch is in question”.
What are the error codes for a Whirlpool dishwasher?
What do your dishwasher error codes mean?
- F01 — Anti-flooding overflow.
- F02 — Water fill solenoid valve failure.
- F03 — Water drain failure/ timeout.
- F04 — Thermostat fault.
- F06 — Water fill timeout.
- F07 — Water turbine damaged.
- F08 — Temperature timeout fault.
- F09 — Software error.
What does F9 mean on Whirlpool dishwasher?
F9 (or 9 flashes) – Continuous water inlet. A dishwasher continuously fills with water for one of two most likely reasons. Either the inlet valve is faulty and is not closing or there is a short circuit on the main control board. The valve or control board may need to be replaced.
What does F10 mean on a Whirlpool dishwasher?
If your dishwasher has come to a halt, and it is flashing an F10 error code on the display panel at you, it is likely that there is a problem with the water temperature sensor.
How long should a Whirlpool dishwasher last?
While 10 years is about the average, some brands claim their products will last up to 13 or even 15 years with the right care….Here’s Who Wins the Battle of the Brands on Longevity.
| BRAND | EXPECTED LIFE SPAN |
|---|---|
| Electrolux and Frigidaire | 10 years+ |
| Kenmore | 10-13 years |
| LG | 10-15 years |
| Maytag, KitchenAid and Whirlpool | 10 years |
What is the lifespan of a dishwasher?
About 10 years
How long should a dishwasher last? About 10 years, according to most of the 20-plus manufacturers we asked. CR members tell us they expect the same life span, on average, but that doesn’t necessarily mean 10 trouble-free years.
What does F11 mean on my dishwasher?
water turbidity sensor
If your Whirlpool dishwasher is displaying an F11 error code on the control panel display, then it’s most likely that there is a problem with the water turbidity sensor.
What does F 10 mean on a dishwasher?
The F10 code, in particular, is related to a drainage error, which means that the appliance is overfilling because there’s more water coming in than there is going out.
What does F 10 in a washing machine mean?
Troubleshooting and Repair – F10 Error Code – GHW9150PW0. The Whirlpool Duet Washer F10 Error means the heat sinks on the motor control unit (MCU) are getting too hot.