How do I fix error code F02?

Find the drain hose at the back of the machine, which carries the drain water from the washer to the wall. If this hose is kinked or heavy objects are placed on top of it, the washer will take too long to drain and the F02 error code will be displayed. Ensure the drain house is unobstructed.

How do I fix Maytag error code F02?

Make sure the drain hose is not kinked or clogged. Straighten the hose for adequate water flow. Remove any blockage from the drain hose, drainpipe or utility sink. Use the U-shaped drain hose form on the drain hose, and secure the drain hose.

How do I fix the F2 on my washing machine?

A stuck contact on the pressure switch can stop the advancement of the wash cycle and keep the water from draining. A few taps on the top of the switch with a screwdriver handle can release the contact and fix the problem causing the F2 error code.

What does F2 mean on a washing machine?

Well, you’ve come to the right place. The F2 error code on an Asko washing machine means that the water levels inside are too high. The most likely reasons are a faulty water inlet valve (which allows too much water to enter the machine) and a failed drain pump (which fails to remove excess water from the drum).

How do I clear the error code on my Maytag washer?

To remove the code, press pause or cancel button twice and the power button once. If the code is still displayed, unplug the washer or disconnect the power for one minute. Items were detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the Clean Washer cycle.

How do you reset the code on a Maytag washer?

What is a F2 error code?

In this case, the F2 error code indicates that the oven temperature is too high. Now, this does not necessarily mean that the temperature inside the oven really is too high. The oven control board (clock) is responsible for measuring the resistance of the sensor circuit.

What does F2 error code mean?

Why is my Maytag washer not draining?

An obstructed drain hose is one of the most common reasons a Maytag washer won’t drain. Both kinks and blockages can obstruct the hose, preventing proper draining. A kinked hose can be gently straightened to restore function.