How do I fix Error 46 on Brother printer?
Machine Error 46 indicates that the ink absorber pad is full and needs replacing. You will need an engineer to replace this. If your machine is out of warranty, please contact Brother Customer Service from “Contact Us”. The ink absorbers hold liquid and dried ink after it has been purged from the print head.
How do I clear error messages on my Brother printer?
To clear these messages, follow these steps:
- Press the ON/OFF key to turn the Brother machine off.
- Unplug the Brother machine from the electrical outlet.
- Wait approximately ten seconds.
- Plug the Brother machine back into the electrical outlet.
- Press the ON/OFF key to turn the Brother machine on.
Why is my Brother printer not printing when ink is full?
Verifying the ink cartridges are installed properly and/or cleaning the print head may resolve this problem. Verify the ink cartridges are installed correctly. Follow the steps listed below to check the print quality and clean the print head. Print a Print Quality Check Sheet.
How do I fix Error 46?
After getting the error, the easiest fix is to restart the Riot Client and try logging in again, which should fix the problem. If the error persists, you might actually end up dealing with error code 46, which deals not only with log-in issues but general platform downtime as well.
How do I fix error 46?
What is code 45 on Brother printer?
Error 45 is a common Brother printer error code. It occurs when the Windows system is not able to acknowledge the device and thinks that the printer is disconnected. This error is most commonly caused by a temporary system file malfunction or by a problem with the registry system files within Windows.
What do you do when your ink absorber is full brother?
The error “Ink Absorber Pad Full” means that the internal ink absorber or flushing box will need to be replaced. The need to replace these items and the time period before replacement is dependent on the number of purges and flushes required to clean the ink system.