How do I connect my Soundlogic shower speaker?
How Do You Put Soundlogic Xt In Pairing Mode? You can turn on or off your speaker by holding the Power/pairing button for three seconds. When the Bluetooth indicator blinks, the speaker enters pairing mode. You should turn on your Bluetooth device and within 33 feet (10 meters) of your speaker to ensure that it works.
How do I reset my Bluetooth shower speaker?
Press and hold button and at the same time. The device is reset and will turn off automatically. 3. After that, turn on the Bluetooth Speaker by press and hold button Note: Do not reset the device if it is in properly working.
How do I pair my Soundlogic XT Bluetooth headphones?
Pairing the device with Bluetooth devices (phone or music device) Ensure the device is turned off, then press and hold the MF button for 4-6 seconds to turn on with sound message ‘Power On, Pairing’, and the LED flashes red and blue.
How do I reset my Soundlogic Bluetooth speaker?
So far, I have found that the only way to reset it is to unplug it from the charger and wait a day for the battery to die. Once the system has powered down completely, you can plug it back in and it will either begin to operate normally, or it will go into pairing mode as if it were brand new.
How do I connect my speaker to my phone?
What to Know
- Put your Bluetooth device in pairing mode by pressing and holding the Power button or Pairing button.
- iPhone: Go to Settings > Bluetooth > Other devices. Tap the device to connect.
- Android: Go to Settings > Connected devices > Bluetooth. Select Pair new device and then tap the speaker’s name.
How do you put Soundlogic headphones in pairing mode?
Ensure the device is turned off before pressing and holding the MF button for 4-6 seconds to turn on with the sound message ‘Power On, Pairing’, and the LED flashes red and blue.
How do Soundlogic headphones connect?
How Do I Pair Soundlogic? You can turn on or off your speaker by holding the Power/pairing button for three seconds. When the Bluetooth indicator blinks, the speaker enters pairing mode. You should turn on your Bluetooth device and within 33 feet (10 meters) of your speaker to ensure that it works.
How do I connect my soundlogic XT speaker to my Device?
Press and hold the WPS key on device to PRESS TO ENTER SETUP MODE Your Soundlogic XT speaker is now connected ADD ANOTHER SPEAKER NOT NOW, IM READY TO PLAY MUSIC DOCK CAW-37052_XXXX SPEAKER HAS BEEN SUCCESSFULLY CONNECTED! Select the room where this speaker is located in the next screen.
How do I know when the speaker is charging?
When the speaker is charging the LED indicator light will be red. When the speaker is fully charged, the red LED will turn off (the charging time is approximately 3 hours). Unplug the Speaker from the power device once the speaker is fully charged.
How do I Turn on/off the speaker on my Device?
Turningon/offtheSpeaker Press and hold the MODE button to turn on the unit, press and hold again to turn it off. PairingyourdevicewiththeSpeaker– YourSpeakercanstreamwirelessaudiofromanyBluetoothenableddevicewithinthe rangeof27-33Feet.Simplyfollowthebelowsteps. 1. Turnonthespeaker. 2.
How do I change the volume on my Bluetooth speaker?
Hold down the ` ` button to increase the volume and hold down the` ` button to decrease the volume. When your Bluetooth device is paired with the speaker and if there is an incoming or outgoing call, the speaker will shift from music mode to call mode automatically.